40 AMP 1/2" PRESS FIT ISOLATED STUD MOUNT SCR


-Warning-
Isolated stud products should be handled with care. The ceramic used in these thyristers contains BERYLLIUM OXIDE as a major ingredient. DO NOT crush, grind, or abrade these portions if the thyristers because the dust resulting from such action may be HAZARDOUS if INHALED. 		1. GATE
2. Cathode
3. Anode (collar)
SYM.
INCHES
A
1.400
B
0.453
0.422
C
0.090
D
0.670
 0.625
E
0.275
F
0.670
0.610
G
0.100
H
0.025
MAXIMUM RATINGS
SYMBOL
 DEVICE NUMBERS UNITS
REPETITIVE PEAK OFF-STATE VOLTAGE AND REPETITIVE PEAK REVERSE VOLTAGE GATE OPEN, AND TJ = 110° C /VDRM
50
100
200
400
600
SIPS040
SIPS140
SIPS240
SIPS440
SIPS640
VOLT
RMS ON-STATE CURRENT AT TC = 80º C AND CONDUCTION ANGLE OF 360º
IT(RMS)
40
AMP
PEAK SURGE (NON-REPETITIVE)
ON-STATE CURRENT, ONE-CYCLE,
AT 50HZ OR 60HZ
ITSM
400
AMP
PEAK GATE - TRIGGER CURRENT FOR 3µSEC. MAX.
IGTM
2
AMP
PEAK GATE - POWER DISSIPATION AT IGT < IGTM
PGM
20
WATT
AVERAGE GATE - POWER DISSIPATION
PG(AV)
0.5
WATT
STORAGE TEMPERATURE RANGE
TSTG
-40 to +150
°C
OPERATING TEMPERATURE RANGE, TJ
TOPER
-40 to +110
°C
PEAK OFF - STATE CURRENT GATE OPEN, TC=110°C VDRM & VRRM=MAX. RATING
IDRM & IRRM
1.0
MA MAX.
MAXIMUM ON - STATE VOLTAGE, (PEAK)
AT TC = 25° C AND IT = RATED AMPS
VTM
1.6
VOLT MAX.
DC HOLDING CURRENT, GATE
OPEN AND TC = 25° C
IHO
50
MA MAX.
CRITICAL RATE-OF-RISE OF OFF-
STATE VOLTAGE, GATE OPEN, TC = 110° C
CRITICAL dv/dt
200
V/µSEC.
DC GATE-TRIGGER CURRENT FOR ANODE
VOLTAGE = 12VDC, RL = 60 W AND AT TC = 25° C
IGT
25
MA MAX.
DC GATE - TRIGGER VOLTAGE FOR ANODE VOLTAGE = 12VDC, RL = 60 W AND AT TC = 25° C
VGT
2.0
VOLT MAX.
GATE-CONTROLLED TURN-ON TIME FOR
TD + TR, IGT = 150 MA AND TC = 25° C
T gt
2.5
µSEC.
THERMAL RESISTANCE, JUNCTION-TO-CASE
RqJ-C
1.6
°C/WATT TYP